With the current development of the transportation industry, the market demand for semi-trailers, trailers and tractors is growing rapidly. As the name suggests, a tractor is a device that pulls between the front and the trunk with tools. Tractors are often used for transporting large quantities of goods within or between workshops, such as from warehouses to assembly lines in the automotive manufacturing industry and luggage transportation at airports. Next, let's take a look at the introduction of the 6x4 tractor.
A tractor is a large truck or ordinary semi-trailer that uses tools to pull between the front of the vehicle and the cargo compartment. The front of the vehicle can be separated from the original front, and other vehicles can be towed through the original front. There are two connection methods between CNG tractors and trailers: One is that the front part of the tractor is installed on the traction saddle above the rear part of the tractor, and the deck at the rear of the tractor supports part of the weight of the tractor, that is, half of the suspended weight. The second type is that the front end of the trailer is connected to the rear end of the towing vehicle, providing only the front traction force but not supporting the weight of the lower part of the trailer. Tractors are usually used to transport large quantities of goods within or between workshops. For example, transporting from an automobile manufacturing warehouse to an assembly line or moving luggage to the airport. According to whether the support is movable or not, it can be classified into fixed support, mobile support and ascending support. The left and right brackets of the fixed tractor are fastened to the tractor seat with bolts, and the tractor seat is fixed to the tractor frame. The fixed type is currently the most widely used one. There are various types of mobile traction bases, and their structure is the same as that of the fixed type. The main reason is that the traction base is designed with multiple holes or teeth and is connected to the longitudinal beam of the tractor. The towing base can be installed front and back as required for the connection of the trailer.
Inspection of the tractor.
1. Inspection of tires
The tire pressure should be checked once a month at room temperature. However, if the tire pressure is lower than the normal standard, it should be replenished in time. The air pressure should not be too high or too low, otherwise it will affect driving safety. Check if the tires have any cracks. If there are any hidden safety hazards, they should be replaced in time. When choosing tires, the models should be coordinated.
2. Battery storage and inspection
Check whether the battery is firmly fixed and the electrolyte level should be between the upper and lower limits. When approaching the lower line, electrolyte or distilled water should be added to the upper line in a timely manner. Keep the positive and negative terminals of the battery in good contact and keep the battery clean and dry. In addition, for tractors that have been stored for a long time, the positive and negative terminals of the battery need to be removed. Reconnect the wires after about half a month and turn on the machine for about 20 minutes. However, if the battery is low, it should be charged in time.
3. Inspection of the clutch master pump liquid level
It is normal for the clutch liquid level to be between high and low. If it is lower than the standard line, it may be that the main pump or the auxiliary pump bowl is damaged. When the engine is running, archiving will become difficult or impossible. Please send it to the nearest service station for repair immediately.
If you are interested in our 4x2 tractor products or have any other needs, please feel free to contact us at any time.